Symptom/Error | FRU/Action |
---|---|
10X | 1. System Board |
110 | 1. Go to 'Memory Checkout' |
2. IC DRAM Card | |
3. System Board | |
111 | 1. Go to 'Memory Checkout' |
2. System Board | |
161 | 1. Go to 'Checking the Backup Battery' |
2. Backup Battery | |
3. System Board | |
163 | 1. Set Time and Date. |
(Time and Date was not set.) | 2. System Board |
173 | 1. Select OK in the error screen, |
(Configuration data were lost.) | then set time and date. |
2. Backup Battery | |
3. System Board | |
174 | 1. Check Device Configuration. |
(Perform | 2. System Board |
'Checking the Installed Devices List' | 3. Diskette Drive Assembly |
before changing any FRUs.) | 4. Hard Disk Drive Assembly |
184 | 1. Reset the POP in Easy-Setup. |
(POP check sum error.) | |
190 | 1. Go to 'Checking the Battery Pack' |
(A depleted battery pack was | |
installed when the power was on.) | |
191XX | 1. System Board |
199XX | 1. System Board |
1XX | 1. System Board |
2XX | 1. Go to 'Memory Checkout' |
2. IC DRAM Card | |
3. System Board | |
301, 303, 304, 305, 3XX | 1. Go to 'Keyboard / Auxiliary Input Device Checkout' |
2. Keyboard | |
3. External Numeric Keypad | |
4. External Keyboard | |
5. Keyboard/Mouse Cable | |
6. System Board | |
601, 6XX | 1. Go to 'Diskette Drive Test' |
2. Diskette Drive Assembly | |
3. Diskette | |
4. System Board | |
602 | 1. Go to 'Diskette Drive Test' |
(Diskette read error.) | 2. Diskette |
3. Diskette Drive Assembly | |
604 | 1. Go to 'Diskette Drive Test' |
(Non-acceptable ID was read | 2. Diskette Drive Assembly |
from the diskette drive.) | 3. System Board |
11XX | 1. Serial Device (First) |
2. Communication Cable | |
3. System Board | |
12XX | 1. Serial Device (Second) |
2. Communication Cable | |
3. System Board | |
17XX | 1. Hard Disk Drive |
2. System Board | |
24XX | 1. System Board |
808X | 1. PCMCIA Slot Assembly |
2. PCMCIA Device | |
3. System Board | |
860X | 1. External Mouse |
(Pointing device error when | 2. External Keyboard |
TrackPoint II or III is disabled.) | 3. System Board |
861X | 1. Reseat the keyboard TrackPoint |
(Pointing device error when | II or III cable. |
TrackPoint II or III is enabled.) | (See '1080 Keyboard Unit') |
2. Keyboard | |
3. External Mouse | |
4. System Board | |
I9990301 | 1. Reseat the boot device. |
I9990302 | 2. Check the startup sequence |
I9990305 | for the correct boot device. |
3. Check that the operating system has no | |
failures, and is installed correctly. | |
I9990303 | 1. System Board |
Other codes not listed above | 1. Go to 'Undetermined Problems' |