Power-On Password (9552)



  Power-On Password (700, 700C)

To disable the ThinkPad 700, 700C power-on password, do the following:
  1.  Power-off the computer.
  2.  Remove the battery pack and the bottom cover.
  3.  Locate the password-override connector on the system board.  (See 'System Board (700)')
  4.  Install a jumper between the two pins at position 1.
  5.  Power-on the computer and wait until the POST ends.


  Remove the jumper from the password-override connector when service is completed.

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.