Symptom-to-FRU Index 701C, 701CS (2630)
Symptom-to-FRU Index 701C, 701CS (2630)
Numeric Error Codes
The Symptom-to-FRU Index
contains tables that list
causes of symptoms.
The most likely cause is listed first.
Use this index
to help you decide which FRUs to have available
when servicing a computer.
please READ - see
Before removing any FRU, power-off the computer, unplug all power cords
from electrical outlets, remove the battery pack, then disconnect any
interconnecting cables.
Perform the FRU replacement or actions in the sequence shown in
the FRU / Action columns.
If the replacement FRU did not solve the problem, put the original
FRU back in the computer.
NOTE:
- Before replacing the top and bottom system boards,
try reseating the boards.
If reseating the boards does not
correct the problem,
replace the boards.
- If possible,
install the latest level of BIOS available
before replacing any FRU.
Before completely reassembling a computer that has been
repaired, try to reboot the computer to check the
repairs that have been completed.
However,
when you reboot without the keyboard attached,
the computer will display error codes 8603, 8613,
and 86XX.
Use displayed numeric error codes to determine
the system problem. If numeric error codes are not available,
use the other symptom tables that describe
specific symptoms.
If the symptom is not listed, go to 'Undetermined Problems'
NOTE:
For IBM devices not supported by diagnostics codes of ThinkPad 701C / 701CS,
see the manual for those devices.
Back to 
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.