Checking Installed Devices
Checking Installed Devices
Installed devices are displayed as dark icons on the
diagnostics screen.
All other devices are displayed with gray icons.
If a device is installed but the icon appears gray rather
than dark, the device is defective.
Reseat the device connectors, and
then restart diagnostics.
If the symptom remains, replace the device or the system board.
If needed, adjust the contrast control to clearly
distinguish the shades of the icon.
If a device that is
not installed appears in a dark shade, for example,
if HDD-2
appears in a dark shade when a
second hard disk drive is not installed,
perform the following steps:
- Replace the first
device, such as HDD-1.
- If the problem persists, replace the relevant system board.
The PCMCIA, System Board, Display, and infrared transceiver icons
are always displayed in a dark shade, because the
icons represent subsystems of the system board and
not attached devices.
The parallel port icon is dark except when
the diskette drive is attached to the parallel port,
in that case,
the FDD icon is dark and the parallel port icon is gray.
Icons for devices attached through the MultiPort II are dark when the devices
are attached, and are gray when the devices are removed
from the MultiPort II.
The HDD-1
icon represents the first
drive in the system configuration.
Similarly, the HDD-2
icon represents the second drive,
attached to the docking station.
Back to 
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.