please READ - see
4-Carefully unsnap the T-shaped snaps along the bottom edge
of the bezel, and lift it out.
Be sure to use the correct replacement
bezel for the LCD.
The TFT bezel has adhesive on its top side wall.
When you install a new TFT bezel, remove the backing first.
5-Remove the microphone
6-Remove the backlight cable protective sleeve.
Replacement:
For detailed information about replacing the microphone and sleeve, see 'Replacing the Microphone and Sleeve'
7-Remove the LCD
When you replace the LCD,
be sure to replace it with the correct
type of LCD (STN or TFT).
8-Remove the LCD cable from the LCD.
9-Remove the latches from the bezel.
10-Remove the latch springs from the latches.
Replacement:
When replacing the latches,
place the latch in the bezel, and then
slide the spring over the post on the latch.
Compress the spring slightly and slip it into
the recess in the bezel.
11-Remove the two right hinge screws (BI)
12-Remove the right hinge.
The left hinge is part of the top cover assembly, and should be
replaced with it as a unit.
NOTE: To clean the LCD,
use rubbing alcohol and a soft cloth.
To avoid damaging the LCD,
do not scratch or apply any force to its surface.
The LCD for the ThinkPad 701C
contains over 921000 thin film
transistors (TFTs).
A small number of missing, discolored, or lighted
dots (on all the time) is
characteristic of TFT LCD technology,
but excessive pixel problems can cause viewing concerns.
The LCD should be replaced if the number of missing or discolored, or
lighted dots in any background is 21 or more.
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.