Quick Charger Test (2523)

Quick Charger Test
  1.  Make sure the AC adapter works correctly by using  the 'AC Adapter Test'
  2.  Verify the battery pack is not thermal protected by using  the procedure on 'Battery Pack Test'
  3.  Plug the quick charger to the AC adapter.  The charger power indicator should turn on.
  4.  Install the battery pack, the charging indicator should start  blinking.
  5.  Within 3.0 hours, the battery pack (not exhausted, standard  size) will be fully charged and the charging indicator changes  from blinking to constant on.

If the charger does not work as stated above, replace the quick charger.

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.