1050 Keyboard Unit (2625)
1050 Keyboard Unit
During removal and replacement procedures, pay special
attention to the LCD Suspend Switch 2. Be
sure the LCD Suspend Switch actuator is properly aligned with the
hole in the cover.
- Remove the plastic upper cover as shown.
- Lift the keyboard and locate the cables as shown.
The keyboard cables are fragile and can be damaged.
Do not pull on the keyboard cables.
Pull on the connectors only.
- When replacing the keyboard, check that the three cables are clean,
and inserted straight and fully into the connectors.
- Test all keyboard keys before returning the computer to the customer.
- When replacing the top cover:
- Be sure the tabs on the back of the
top cover are seated in the bottom of the LCD display
- Be sure the LCD Suspend Switch actuator is properly aligned with the
hole in the cover.
Back to 
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.