Error Log (2640)
Diagnostic errors are printed
on the printer that is attached to the parallel port when the
error is detected.
The error is also logged in the system memory.
Do the following to display the errors.
- End the test, if it is running.
- Press Ctrl+A to select the advanced diagnostic mode.
- Press Ctrl+E.
- The error log appears.
- To exit the screen, select the cancel icon or press Esc.
The error log is not saved when system power is powered-off.
Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.