1100 System Board (2640-560x - 60x, 70x)

System Board

•  DIMM Card (if installed)
•  Battery Pack
•  Frame
•  Keyboard Unit
•  LCD Assembly
•  Speaker
•  Hard Disk Drive
•  PC Card (PCMCIA) Slot Assembly

1.  The system unit serial number must be restored when the system board is  replaced. To restorethe system unit serial number, select the option Set system identification  on  the maintenance diskette. The flash ROM on the system board contains the vital product data (VPD),  that is, the system unit serial number, system board system number, and other computer-unique data.
2.  Do not power off the computer when restoring the VPD. The system unit serial number label is attached to the  base cover.

 +----+----+-------+
 |Step|Qty |Torque |  Screw No.
 +----+----+-------+

   1    6    3kgcm   
 -------------------

   2    2    2kgcm   

NOTE: Make sure you use the correct screw, and tighten it firmly to the torque shown in the table if you have a torque screwdriver.
Never use a screw that you removed. Use a new one. Make sure the screw is tightened firmly.
(see Screw Tightening Information if you do not have a torque screwdriver.)

 +----+----+-------+
 |Step|Qty |Torque |  Screw No.
 +----+----+-------+

   4    3    4kgcm   
 -------------------

NOTE: Make sure you use the correct screw, and tighten it firmly to the torque shown in the table if you have a torque screwdriver.
Never use a screw that you removed. Use a new one. Make sure the screw is tightened firmly.
(see Screw Tightening Information if you do not have a torque screwdriver.)

Please see the LEGAL  -  Trademark notice.
Feel free - send a   for any BUG on this page found - Thank you.