Infrared-Related Symptoms (9546, 9547)

Infrared-Related Symptoms
Symptom / Error    FRU / Action in Sequence
   Unable to communicate using 1. Make sure the setup for the IR is correct.
   the Infrared (IR) Port. 2. Make sure there are no fluorescent lights near
      the computer. The computer may receive optical
      noise from the fluorescent light.
  3. Reseat the IR unit.
  4. Run the advanced diagnostic test. If an error occurs
      and a FRU code is displayed, replace the parts
      shown by the FRU code.

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.