Password / Power Shutdown Switch (2635 380-385)

Password / Power Shutdown Switch

How to Disable the Power-On Password 
  1.  Power off the computer.
  2.  Turn the computer upside down, loosen the DIMM cover screw 1,  remove the DIMM cover 2, then power-on the computer by applying a  short across the power-on password jumper pads 3


  3.  Verivy that the password prompt does not appear.

To reactivate the password, set the password again.

Power Shutdown Switch 

The power shutdown switch resets the system regardless of the microcode status and forces the power off. Use this push button to power-off when power is not completely off or the microcode is in a hung state.


Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.