Running Fan Diagnostics Program (2600-310/310D/310E/310ED)

Running Fan Diagnostics Program

The system is equipped with sensors to protect against system overheating. By setting video controller and processor thermal thresholds, the system can turn on the cooling fan or shut down automatically when temperature reach the defined threshold parameters.

For systems experiencing frequent auto sensor shutdown, you might need to reset the thermal sensor threshold (refer to 'Setting Thermal Sensor Threshold') and execute the fan test to ensure the cooling fan is operating normally.

Follow the steps below to use Fan Diagnostics Program:
  1.  Boot from the Diagnostic Program Disk.
  2.  Select Fan Diagnostics from PC DOS 7.0 Startup Menu.
  3.  Follow the instruction on screen to execute fan diagnostics

NOTE: If test failed, try reseating the fan connector or replacing the fan.

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.