LCD Removal and Replacement (2600-310/310D/310E/310ED)



LCD Removal and Replacement


LCD Display Module

 

Step Size (Quantity) Head and Color Memo
1 M2x5L (2) Pan head
Yellow Zn
 
2 M2.5x8L (4) Pan head, silver w/ nylock paste


NOTE: Be sure to use the correct screw when replacing.


LCD Bezel

NOTE: When removing the LCD, take note of the following.

  1.  Be careful not to scratch the LCD cover when removing the screw covers.
  2.  The LCD cover has several latches. Release these latches, then remove the LCD cover. Be  careful not to break the latches.


 

Step Size (Quantity) Head and Color Memo
2 M2.5x6L (3) Pan head, black w/ nylock paste


NOTE: Be sure to use the correct screw when replacing.


LCD, LCD Cover, LCD FPC Cable,
LCD Left Hinge, and Inverter


  After you replace the LCD or inverter, follow the instructions

in   'Setting the Inverter ID'


 

Removing Procedures:
Remove LCD: 1 2 3
Remove Inverter: 1 2 3 4 5
Remove Left Hinge: 6 7
Remove Right Hinge: 1 2 3 4 5 6 7

Step Size (Quantity) Head and Color Memo
1 M3x6L (4) Bind head, silver  
4 M2x3L (2) Pan head, silver  
7 M2.5x6L (2) Pan head, black w/ nylock paste


NOTE: Be sure to use the correct screw when replacing.


LCD Right Hinge and LCD Diaper

 

Step Size (Quantity) Head and Color Memo
1 M2.5x6L (2) Pan head, black w/ nylock paste


NOTE: Be sure to use the correct screw when replacing.


Back to  Jump to TOP-of-PAGE

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.