FRU Codes (TP-770 - 9548/49)

FRU Codes

If an error is detected by the diagnostic tests, a four-digit  FRU code is displayed. The FRU code indicates two suspected FRUs. Replace the FRU that is indicated by the two leftmost digits  first, then replace the FRU indicated by the two rightmost digits . No FRU is assigned to code 00. If only one FRU is suspected, the other FRU code is filled with zeros. See the referenced page before replacing the FRU.

FRU Code FRU/Action
10 System Board
11 CPU Card
12 DC/DC card
16 Modem card
20 Memory (See 'Memory Checkout'.)
30 Reserved
32 External Keyboard
33 External Mouse
34 AC Adapter
35 Speaker
36 Battery in the battery bay
37 Battery in the UltraBay II
38 Fan
40 LCD Unit
41 DVD Adapter Card
42 Video card
45 External CRT
50 1. Reseat the Diskette Drive (FDD-1)
2. Reseat the external FDD cable on
the video card
3. Diskette Drive (FDD-1)
51 1. Reseat the Diskette Drive (FDD-2)
2. Diskette Drive (FDD-2)
60 1. Reseat the Hard Disk Drive (HDD-1)
2. Hard Disk Drive (HDD-1)
61 1. Reseat the Hard Disk Drive (HDD-3)
2. Hard Disk Drive (HDD-3)
62 1. Reseat the Hard Disk Drive in UltraBay II
2. Hard Disk Drive in UltraBay (HDD-2)
63 1. Reseat the Hard Disk Drive (HDD-4)
2. Hard Disk Drive (HDD-4)
70 PCMCIA-2 (replicator)
72 1. Reseat the PCMCIA slot assembly
2. PCMCIA Slot Assembly
73 Port Replicator
74 Main board of the docking station
75 USB card of the docking station
90 CD-ROM Drive
91 External CD-ROM Drive
92 DVD Drive
93 External DVD Drive

NOTE: The device ID and error codes are used to indicate the detailed portion of the FRU that caused the error. If replacing a FRU does not correct the problem see the device ID error code from the previous failure. If they have changed, the cause might be because the new FRU is defective or that the FRU was incorrectly installed.

If the problem remains after replacement of the FRUs, go to 'Undetermined Problems'.

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.