Displaying the Error Log (TP 380-2635/40 - 600-2645)
Displaying the Error Log
Diagnostic errors are printed on a printer attached to the parallel port when the error is detected. The error
is also logged in the system memory.
Use the following procedure to display the errors.
- Enter the advanced diagnostic test.
- Press Ctrl+E.
- The error log appears.
- To exit the screen, click on Exit or press Esc.
The error log is not saved when system power is turned off.
Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.