Diagnostic Error Codes (TP 600/600E - 2645)
Diagnostic Error Codes
If an error is detected, the following appears:
- Large X on the left side of the device icon.
- Device ID (three digit)
- Error code (two digit)
- FRU code (four digit)
The device ID and error code are used to indicate the detail
portion of the FRU which caused the error.
If replacing a FRU does not correct the problem, see the device ID
or error code from the previous failure.
If they have changed, the cause might be because
the new FRU is defective or that the FRU was incorrectly installed.
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.