Inverter Card
Please see the LEGAL - Trademark notice.
Step
Screw (Quantity)
Color
Torque
2
M2x3mm nylon-coated (6)
Silver
2.5 kgcm
When replacing: Connect the LCD connector to the
inverter card by lining them up straight:
13.3-Inch TFT Panel
Step
Screw (Quantity)
Color
Torque
1
M2.5x4.8mm nylon-coated (1)
Black
4 kgcm
When replacing: Make sure you use the correct screw and tighten
the screw firmly to the torque specified.
Do not use the screw that you removed, use a new screw.
13.0-Inch HPA Panel (600 Only)
Step
Screw (Quantity)
Color
Torque
1
M2.5x4.8mm nylon-coated (1)
Black
4 kgcm
When replacing: Make sure you use the correct screw and tighten
the screw firmly to the torque specified.
Do not use the screw that you removed, use a new screw.
Back to
Feel free - send a for any BUG on this page found - Thank you.