Fan Checkout (TP 560Z - 2640)

Fan Checkout

To check the fan, do the following:

1.  Start Easy-Setup.
2.  Click on Test. The fan will start so you can check the air turbulance at the fan louver.
3.  Press Ctrl+A to enter the advanced diagnostic mode. The ThinkPad FRU Connections window  appears. If the fan connector is not connected, the Fan not connected message appears.
4.  Click on Exit. The keyboard layout appears on the screen.
5.  Click on Exit again.
6.  Click on System Board then press Enter to run the test.  Follow the description in the window. If the test detects a fan problem, replace it.