TrackPoint Checkout (TP 560Z - 2640)

TrackPoint Checkout

If the TrackPoint does not work, do the following:

1.  Run the ThinkPad Configurations program and check if the TrackPoint is enabled.
2.  If it is not, select Enable and enable it.
3.  If you still have a problem, continue to the next step.

   Drifting Pointer
    There may be cases when the pointer drifts for a
    short while on the screen, this is not a hardware
    problem. This movement can occur when a slight,
    steady pressure is applied to the TrackPoint.
    No service action needs to be taken.

4.  Go to the Easy-Setup menu.
5.  Move to an item with the TrackPoint.
6.  Press either the left or the right click button.
7.  Verify that both buttons work correctly.
8.  Move to another item with the TrackPoint.
9.  Press the TrackPoint. (Press-to-Select).
10.  Verify that the item is selected.
11.  If the problem still persists, do the following one at a time:

  Do not replace a nondefective FRU.


Reseat the TrackPoint cable.
Replace the keyboard.
Replace the system board.