1060 Keyboard Unit (TP 560Z - 2640)


Keyboard Unit


After removing the screws -1- , remove the left and right hinge support brackets -2- , the three brackets -3- , and the gasket -4-
 

Step Size (Quantity) Torque
1 M2.5 x 4mm, black plain-head (5) 4kgcm


When re-installing: Make sure you use the correct screw, and tighten it firmly to the torque shown in the table if you have a torque screwdriver. Never use a screw that you removed. Use a new one. Make sure the screw is tightened firmly (see 'Screw Tightening Information' if you do not have a torque screwdriver).

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.