Fan Assembly, CPU Card, Thermal Rubber
When removing, be careful not to damage the CPU card.
Please see the LEGAL - Trademark notice.
Step
Size (Quantity)
Torque
1
M2 x 6mm, nylon-coated (2)
2-3 kgcm
3
M2 x 18mm, nylon-coated (3)
2-3 kgcm
NOTE: Make sure you use the correct screw, and tighten all
screws firmly to the torque shown in the table, if you have a torque screwdriver.
Never use a screw that you removed.
Use a new one. Make sure the screws are tightened firmly.
Step
Size (Quantity)
Torque
6
M2 x 6mm, nylon-coated (2)
2-3 kgcm
NOTE: Make sure you use the correct screw, and tighten all
screws firmly to the torque shown in the table, if you have a torque screwdriver.
Never use a screw that you removed.
Use a new one. Make sure the screws are tightened firmly.
When installing
Make sure the connectors are fitted firmly by pressing the corners of the card.
A loose connection or a damaged card causes a power failure.
The following figure shows the route of the fan assembly cables:
Back to 
Feel free - send a 
for any BUG on this page found - Thank you.