LCD Panel
Step
Size (Quantity)
Torque
2
M2.5 x 4.8mm, flat head (1)
3-4 kgcm
3
M2.5 x 6mm, flat head (3)
3-4 kgcm
NOTE: Make sure you use the correct screw, and tighten all
screws firmly to the torque shown in the table, if you have a torque screwdriver.
Never use a screw that you removed.
Use a new one. Make sure the screws are tightened firmly.
NOTE: Lift the LCD panel a little to disconnect the flexible cable in step -4-
The position of the flexible cable connector may vary by the type of LCD.
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.