Message on Parameter
LCD
TV Channel
(xx) By using <- and +> you can select the channels
from 2 to 69.
Color Adjustment
COL By pressing and holding <- or +>
you can change the color.
TINT Adjustment
TNT By pressing and holding <- or +>
you can change the tint.
Bright Adjustment
BRT By pressing and holding <- or +>
you can change the brightness.
Contrast Adjustment
CNT By pressing and holding <- or +>
you can change the contrast.
--- (No function)
Reserved.
Auto Tune Sensitivity Selection
LO LO: Means the sensitivity
of the TV is low. In this mode, the TV Tuner receives
strong TV signals only. To set LO,
press <-
HI HI: Means the sensitivity
of the TV is high (factory default).
In this mode, the TV Tuner receives weak and strong TV signals.
To set HI, press +>
D3S Time On-Screen Message appears
D3S: On-screen Message appears for 3 seconds.
To set D3S, press <-
DON DON: On-screen Message always appears.
To set DON press +>
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.