Error Messages


Error Messages

Symptom/Error    FRU/Action in Sequence
   Device Address Conflict 1. Load Setup Defaults in BIOS Setup Utility.
  2. Backup battery (RTC)
  3. System/planar board
   Allocation Error 1. Load Setup Defaults in BIOS Setup Utility.
   for: device 2. Backup battery (RTC)
  3. System/planar board
   Failing Bits: nnnn 1. DIMM
  2. BIOS ROM
  3. System/planar board
   Invalid System 1. BIOS ROM
   Configuration Data 2. System/planar board
   I/O device IRQ conflict 1. Load Setup Defaults in BIOS Setup Utility.
  2. Backup battery (RTC)
  3. System/planar board
   Operating system 1. Enter BIOS Setup Utility and see if the hard disk
   not found     drive and diskette drive A: are properly identified.
  2. Diskette drive (FDD ASM)
  3. Hard disk drive
  4. System/planar board
   Critical battery low    Save your work, then connect the AC Adapter to the computer to
     recharge the battery.


Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.