Running PCMCIA Wrap Card Test

Running PCMCIA Wrap Card Test

Boot from the Diagnostic Program Diskette and select "PCMCIA Wrap Card Test" from PC DOS 7.0 Startup Menu.
Follow the instructions on the screen to run the PCMCIA test.

The green LED on the PC test card lights up when the PCMCIA test is running.
If the LED does not light up, check whether the card is installed correctly by reconnecting the card.
If it still does not light up after it is reconnected, try using another slot for the test.
If the LED still does not turn on and the test fails, go to 'PC Card (PCMCIA)-Related Symptoms' to replace the possible defective FRU.