Infrared-Related Symptoms (WP z50 - 2608)

Infrared-Related Symptoms

Symptom/Error	FRU/Action in Sequence
Unable to communicate using	1. Make sure the setup for the IR is correct.
the Infrared (IR) Port.	Use the WorkPad z50 Configuration utility.
	2. Make sure there are no fluorescent lights near the
	WorkPad z50. The WorkPad z50 may receive optical
	noise from the fluorescent light.
	3. Run the advanced diagnostic test. If an error
	occurs, replace the parts shown by the FRU code.

Note: If you cannot find a symptom or an error in this list and the problem remains, see 'Undetermined Problems'.