Peripheral Device Related Symptoms (WP z50 - 2608)

Peripheral Device Related Symptoms

Symptom/Error	FRU/Action in Sequence
The external monitor does	1. Check that the external monitor is enabled in the
not work correctly.	Rapid Access utility.
	2. Check that the external monitor can display at
	640x480 and 800x600, and 75Hz refresh rate.
	3. Connect the external monitor to another PC.
	If the monitor works fine, replace the mainboard.
	If not, replace the external monitor.
Serial port device problems.	1. Run serial port wrap test
	2. Device
	3. Mainboard
	4. Device cable
	Note: The serial port and the infrared port
	can not be used at the same time.

Note: If you cannot find a symptom or an error in this list and the problem remains, see 'Undetermined Problems'.