Configuration (Server 330)
Configuration
NOTE:
The SCSISelect utility program does not configure the drives in an array.
For Disk Array configuration information see 'PC ServeRAID Adapter'
The Configuration/Setup utility programs are part of the
basic input/output system (BIOS )
that is shipped with the server.
Use these programs to set the system date and time, define
input and output device parameters, and define system security.
The PC Server System Board Diagnostic Diskette that is shipped with
the server provides additional configuration and diagnostic support for the
system board, disk drives, and other system components.
The built-in SCSISeclect utility program configures the SCSI devices
installed in the server. You can use SCSISelect to change default
values, resolve configuration conflicts, and perform a low-level format on
a SCSI hard disk drive.
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.