Using the Configuration/Setup Utility Main Menu
Using the Configuration/Setup Utility Main Menu
The Configuration/Setup utility program Main Menu lets you select
settings you want to change.
The Configuration/Setup Utility main menu is similar to the following screen.
Pressing F1 displays Help information for a selected
menu item.
NOTE:
If you enter only the power-on password and an administrator
(supervisor-level) password is also set, a limited version of the
menu appears.
To change configuration settings:
- Use the Up Arrow (
) or Down Arrow ( 
) keys to select
the menu item for the configuration setting you want to change.
Selected items are highlighted.
Press Enter.
- Select the configuration setting you want to change.
Use the Page Up (PgUp) and Page Down (PgDn) keys to scroll through
the menu, if needed.
- Use the Right Arrow (>) or Left Arrow (<) keys
to select the appropriate setting for the selected item.
- Repeat Steps 1 through 3 for each setting you want to change.
Press ESC to return to the Configuration/Setup Main Menu.
- After making changes, you can:
- Select Save Settings to save the selected changes.
- Select Restore Settings to delete the changes and
restore the previous settings.
- Select Load Default Settings to cancel the changes
and restore the factory settings.
- To exit from the Main Menu, select Exit Setup.
The system prompts you to confirm your choice.
You can save your changes and exit, exit without saving your
changes, or return to the Main Menu.
System Summary
Select this choice to display configuration information, including the
type and speed of the microprocessor and amount of memory.
Changes that you make to configuration settings appear on this summary
screen. You cannot edit the fields.
The System Summary choice appears on the full Configuration/Setup menu
and on the limited Configuration/Setup menu.
Back to 
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.