Using the EISA Configuration Diskette (Server 330)
Using the EISA Configuration Diskette
You must use the EISA Configuration Diskette anytime you want
to add, move, or remove EISA or ISA adapters.
In addition, you might need to use the diskette to resolve
configuration conflicts.
Also, if you disable the serial, parallel, infrared, or
diskette drive in the Configuration/Setup utility programs,
you might need to run the EISA Configuration Diskette,
and make the same change.
Refer to the README file on the EISA Configuration Diskette
for more information.
Each time you use the EISA Configuration Diskette to
configure the server, the configuration information is
saved in a System Configuration Information (SCI) file and
in the NVRAM configuration. Only devices that are installed and
configure correctly appear on the EISA Configuration screens.
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.