EISA Configuration Diskette
EISA Configuration Diskette
You must use the EISA Configuration Diskette anytime you want
to change resource allocations, such as:
- Adding or removing devices
- Moving devices
- Changing device function
- Resolving conflicts
- Adding or removing EISA or ISA adapters
In addition, if you disable the serial, parallel, infrared, or
diskette drive in the Configuration/Setup utility programs, you might
need to run the EISA Configuration Diskette and make the same change.
Refer to the README file on the EISA Configuration Diskette for
more information.
Each time you use the EISA Configuration Diskette to
configure the server, the configuration information is
saved in a System Configuration Information (SCI) file and
in the NVRAM configuration. Only devices that you install and
configure correctly appear on the EISA Configuration screens.
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.