Configuration/Setup Utility Program

Configuration/Setup Utility Program

To access the Setup program:

  1.  Remove all diskettes from the server.

    NOTE:   Never start the Setup program while using the EISA Configuration program.

  2.  Power-on the server and watch the screen. Be ready to act quickly.
  3.  After the IBM logo screen appears, you are prompted  to Press <F1> to enter SETUP .  As soon as you see that prompt, press the F1 key.  If the Setup program screen doesn't appear,  restart the system and try again.


    1.  If a configuration error occurs, a prompt appears  before the operating system starts (see 'Configuration Conflicts').
    2.  Record the current settings before making changes to the  configuration.

  4.  Follow the instructions on the screen to view or change the  configuration.

     You must correctly  exit from the Setup program  to save the configuration information.

  5.  Press Esc or  move the cursor to the Exit Setup option on the menu bar.
  6.  Select Exit Setup from the menu bar.
  7.  Select Save changes and exit.

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.