SCSISelect Utility Program

SCSISelect Utility Program

The PC Server is shipped with a menu-driven configuration utility program, called SCSISelect, that allows you to view and change SCSI settings.

Use the SCSISelect Utility program to:

View and change the default SCSI ID values
Verify and change configuration conflicts
Perform a low-level format on a SCSI hard disk

Starting the SCSISelect Utility Program

You can access this program when you start the server. The SCSISelect prompt appears after the IBM PC Server screen appears briefly and then disappears. Press Ctrl+A immediately after all drives have spun up.

NOTE: If the screen displays a Not Ready message, you might have pressed Ctrl+A before the drives spun up. Restart the server.

Use the Up Arrow ( ) and Down Arrow ( ) key to move the highlight bar to the various menu choices. Press Esc to return to the previous menu. Also, you can press the F5 key to switch between color and monochrome modes (if the monitor permits). To change the settings of the displayed items, follow the directions on the screen.

Back to

Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.