Secure Mode (Netfinity 7000 - 8651)

Secure Mode

Secure mode helps to protect the system against unauthorized use. Secure mode inhibits keyboard and mouse input, and disables the power switch and reset button. Secure mode takes effect when the keyboard and mouse remain inactive for an amount of time that you determine. You can gain access to the system only after you enter the correct user password.

NOTE: You must set a user password before you can enable secure mode.

Refer to the following for information on the options available for the secure mode.

Options Description
Hot Key
Specifies a set ot keyboard commands that
will place the system immediately into secure
Specifies a keyboard and mouse inactivity
timeout period ot 1 to 128 minutes (in
one-minute increments). If the timer is
enabled, and no keyboard or mouse activity
occurs for the specitied period. keyboard and
mouse input is inhibited.
Boot Mode
Specifies if the keyboard and mouse will be
disabled after POST completes and the
operating system has loaded.
You must enter the user password to unlock
the keyboard and mouse.
Specifies whether secure mode will cause
the monitor to go blank.
Specifies whether writing to a diskette is
enabled or disabled when the system is in
secure mode.
Specifies if the power switch and reset
button are disabled when the system is in
secure mode.

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.