Starting the System Configuration Utility Program (Netfinity 7000 - 8651)

Starting the System Configuration Utility Program

To access the System Configuration Utility program:

1.  Insert the System CD-ROM into the CD-ROM drive.
2.  Turn on the system. Or, if the system is turned on, press Ctrl+Alt+Del.
    The system begins the power-on self-test (POST). If  you have set a user password, the system prompts you to enter it.

   NOTE:

   1.  If a user password is set, you must enter it to  access the System Configuration Utility program.  If you have set user and administrator  passwords, you can enter either one. If you  have set an administrator password, you must  enter the administrator password to change and  save configuration data.
   2.  If a configuration error occurs, a prompt appears  before the operating system starts (see 'Configuration Conflicts').

3.  Select Run System Configuration Utility from the Startup Menu.
4.  Press Enter when the system configuration utility title screen appears.
    A screen similar to the following appears when you start the system configuration utility program.
    
    Use the following commands to navigate through the screens and make selections.

Action	Press Key
Change between major menus	< or >
Highlight an item	or
Select an item	Enter
End activity without changing configuration	Esc
Get help	F1

Please see the LEGAL  -  Trademark notice.
Feel free - send a   for any BUG on this page found - Thank you.