Parallel Port (Netfinity 7000 - 8651)

Parallel Port

The parallel port usually is used to communicate with printers, and transfers data one byte at a time using DMA The parallel port has a 25-pin.. female D-shell connector on the back of the server. (Refer to 'Input/Output Connectors and Expansion Slots' for the location of the connector.)

When you power-on the server, the POST routine assigns the parallel port a specific port address. You can change the parallel-port assignment by using the System Configuration Utility programs.

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.