Device Driver Installation



Device Driver Installation

OS/2 Device Driver Installation:

The OS/2 adapter device driver is stored in the C:\OS2 and C:\OS2\DLL directories unless otherwise specified by you. The CONFIG.SYS file is also updated.

To install the adapter device driver and dynamic link library (DLL):
  1.  Insert the adapter configuration diskette into the diskette drive.
  2.  Open an OS/2 window.
  3.  At the OS/2 prompt type:

      A:

     and press Enter

  4.  At the A: prompt type:

      OS2\SETUP

     and press Enter

  5.  Follow the menu prompts to complete the installation.
  6.  Restart the system to activate the device driver.


Refer to the TME 10 NetFinity Version 4.1 documentation for information on the operation and functions of the adapter.


Windows NT Device Driver Installation:

The Windows NT adapter device drivers are stored in the Windows NT system directories.

To install the adapter device drivers:

  1.  Insert the adapter configuration diskette into the diskette drive.
  2.  Log on with administrator privileges.
  3.  Open a DOS window.
  4.  At the DOS prompt type:

      A:

     and press Enter

  5.  Type CD\NT

     and press Enter

  6.  Type SETUP

     and press Enter


The adapter device drivers are loaded and started.

Refer to the TME 10 NetFinity Version 4.1 documentation for information on the operation and functions of the adapter.


Novell NetWare Device Driver Installation:

To install the Novell NetWare adapter device driver:

  1.  Insert the adapter configuration diskette into the diskette drive.
  2.  At the NetWare prompt type

      LOAD A:\NETWARE\SETUP

     and press Enter

  3.  Follow the on-screen prompts. If you accept the default choices, the adapter  device driver is copied to the hard disk as:

      SYS:\SYSTEM\IBMSPN.NLM

     and the AUTOEXEC.NCF file is updated.

  4.  To load the adapter device driver:

    1.  Restart the system

        - or -

    2.  At the NetWare prompt type:

       SEARCH ADD path  (where path is the path the driver was copied to in step 3)

       and press Enter

       At the NetWare prompt type

        Load IBMSPN port-adrs irq  (where port-adrs 
        is the port address you selected and irq 
        is the interrupt you selected during the adapter
        configuration procedure)

       and press Enter

       The adapter device driver will load without restarting the server.



Refer to the TME 10 NetFinity Version 4.1 documentation for information on the operation and functions of the adapter.

Back to  Jump to TOP-of-PAGE

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.