To view the Test Log

To view the Test Log:

If you are already running the diagnostic programs, continue with Step 4 in this procedure.

  1.  Turn on the server and watch the screen.  If the server is turned on already, shut down the  operating system and restart the server.
  2.  When the message F2 for Diagnostics appears, press F2.
     If a power-on password or administrator password is set, the server prompts you for it.
     Type in the appropriate password, then, press Enter.
  3.  The Diagnostic Programs screen appears.
  4.  Select Utility from the top of the screen.
  5.  Select View Test Log from the list that appears, then, follow instructions on the screen.

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.