Viewing the ServeRAID II Controller Status

Viewing the ServeRAID II Controller Status

When you select View Adapter Status from the Main Menu, a screen similar to the following appears.

•  Unattended shows the current state of the  Unattended Mode, On or Off. (See 'Changing the RAID Parameters'.)
•  Read Ahead shows the current state of the Read  Ahead Cache Mode, On or Off. (See 'Changing the RAID Parameters'.)
•  BootCd shows the current state of the BootCd  function, On or Off. (See 'Setting the BootCd Feature'.)
•  CompMode shows the BIOS compatibility mode. On  indicates 8GB Extended, Off indicates 2GB Limited.
•  Boot Bk shows the current version number of the  startable code stored in the Boot Block.
•  Code Bk shows the current version number of the  firmware (microcode) for the ServeRAID controller.
•  Rebuild Rate shows the current speed of the rebuild  process: High (default), Medium, or Low. (See 'Changing the RAID Parameters'.)
•  No. of DDD Drv. shows the current number of  defunct drives.
•  No. of OFL Drv. shows the current number of offline  logical drives.
•  No. of CRT Drv. shows the current number of critical  logical drives.
•  Cfg. Updates shows the current number of times that  the configuration has been updated. When you  initialize the configuration, the Cfg. Update is reset to  zero.
•  Flash Pgms shows the current number of times that  the firmware EEPROM has been updated.
•  Locked, Bad Stripe, or Blocked Drive identifies the  logical drives that are affected, and contains the  following fields:
  •  Bad Stripe indicates the logical drives that  contain bad stripes.
  •  Locked Stripe is a reserved field.
  •  Blocked Drive indicates the logical drives that  are blocked. The drives that are blocked cannot  be used until they are unblocked. (See 'Unblocking Logical Drives'.)

Please see the LEGAL  -  Trademark notice.
Feel free - send a   for any BUG on this page found - Thank you.