Logical Drive Information Panel

Logical Drive Information Panel

When you select a logical drive from the Main Tree, the following information appears in the Main Panel on the right:

•  Logical Drive Number shows the number (1 to 8) assigned to the logical drive.
•  Array Letter shows the letter (A through H) assigned to the array in which the logical drive resides.
•  Drive State shows the current state of the logical drive.  See 'Logical Drive State Descriptions'  for descriptions of the states that might appear in this field.
•  RAID Level shows the RAID level (0, 1, or 5) assigned to the logical drive.
•  Data Space in MB shows the amount of space in the logical drive defined for data storage.
•  Parity Space in MB shows the amount of space in the logical drive allocated for parity storage.
•  Date Created shows the date that you created the logical drive.
•  Write-Cache Mode shows the current setting, write through or write back, for the logical drive.
•  Battery Backup Write Cache shows the current setting,  Enabled or Disabled, for the battery backup  cache device. When the battery backup cache device  is installed, write cache is set to the write-back mode.
•  Merge-Group Number appears if the ServeRAID  controller is part of a cluster. The valid settings in the  Shared state are 1 through 8. Valid settings in the  Non-Shared state are 201 through 215.
•  Merge-Group State shows the current setting,  Shared or Non-Shared, for this parameter.