ServeRAID IPSMON Program (Starting
ServeRAID IPSMON Program (Starting)
You can run the IPSMON program from the operating system command line.
To start the IPSMON program:
- If you are using OS/2 or Windows NT:
1. Type: c:\ipsadm\ipsmon
2. Press Enter.
NOTE: The c represents the drive where OS/2 or Windows NT is installed.
- If you are using Novell NetWare:
1. From the console, type: load ipsmon
2. Press Enter.
- If you are using SCO OpenServer or UnixWare:
1. Type: /usr/bin/ipsmon
2. Press Enter.
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.