Installing IPSSEND for DOS

Installing IPSSEND for DOS

To install IPSSEND for DOS:

1.  Create a startable diskette. To do this, insert a blank diskette in diskette drive A, then, type:

   format a: /s

2.  Press Enter.
3.  Copy the ASPI device driver from the DOS directory on the IBM ServeRAID Device Driver Diskette to the  startable diskette.
4.  Copy the IPSSEND.EXE file from the DOS directory on the IBM ServeRAID Command Line Programs  Diskette to the startable diskette.
5.  Leaving the startable diskette in the diskette drive, restart the system, then, refer to 'Starting the ServeRAID Administration and Monitoring Program' for information to start and use the  IPSSEND and IPSMON programs.