Removal From Rack (Netfinity EXP15

Removal From Rack (Netfinity EXP15 - 3520)

Removal From Rack

The expansion unit should only need to be removed from the rack for replacement of the midplane board/frame assembly.
See 'Parts Listing' for more information.

1. Remove screws -1- from assembly rails at rear.

2. Remove screws -2- and remove bezel -1-

3. Slide expansion unit out of rack.

NOTE: Avoid touching the LED lights when removing the unit to avoid damage to the expansion unit.

Please see the LEGAL - Trademark notice.
Feel free - send a

for any BUG on this page found - Thank you.