Removing the Front Bezel (Netfinity 7000-M10 - Type 8680)


Removing the Front Bezel: Refer to the following illustration while you perform the steps in this procedure.

Before you begin: Read 'Safety Information'.

 

To remove the front bezel:
  1.  Press on the tabs at the top edge of the bezel -1-.
  2.  Pivot the top of the bezel slightly away from the server and remove the bezel from the server.

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.