Installing the files for Windows NT 4.0 - IBM ServeRAID-3H and ServeRAID-3L Adapters


Installing programs for Windows NT 4.0

This section provides the instructions for installing the device drivers and the backgroud-server component for Windows NT 4.0.

Installing the device drivers while installing Windows NT 4.0

To install the ServeRAID device driver while installing Windows NT 4.0:

  1.  Insert the Windows NT startup (boot) diskette into the diskette drive or insert the startable Windows  NT CD into the CD-ROM drive, then, restart the server.

  2.  When the message

          Setup is inspecting your computer's hardware configuration...
        appears, press the F6 key.

  3.  After loading some files, Windows NT displays a screen that allows you to manually specify an  adapter. When this screen appears, press S to specify additional devices.
  4.  When prompted in the next window, select Other from the list.
  5.  When prompted to insert the Manufacturer-supplied-hardware support disk, insert the IBM ServeRAID Device Driver Diskette  into the diskette drive, then, press Enter.
  6.  Select IBM ServeRAID Adapter (NT 4.0), then, press Enter.
     A message similar to the following will appear:

          Setup is loading files (IBM ServeRAID Adapter (NT 4.0))...
      

  7.  When prompted, press Enter to continue.
  8.  Use the instructions provided in the Windows NT manual to complete the normal installation process.
  9.  After you complete the installation, be sure to apply the latest Service Pack.
  10.  Continue with 'Installing the background-server component for Windows NT 4.0'.

Back to  Jump to TOP-of-PAGE

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.