Running the diagnostic test programmes

Running the diagnostic test programs

Note:

See Diagnostic test programs for a description of the diagnostic programs that come with the server.

  - Attention - Do Do not discard the Enhanced Diagnostics CD. Store it in a safe place for later use.

To start the IBM Enhanced Diagnostics using the CD backup Diagnostic Diskette, do the following:

1.  Power-off the server and any attached devices.
2.  Insert the IBM Enhanced Diagnostics backup diskette into diskette drive A.
3.  Power-on all attached devices, then, power-on the server.
4.  Follow the instructions on the screen.

1.  Insert a blank, 3.5-inch, formatted 2 MB diskette into diskette drive A.
2.  Boot the system with the Diagnostics CD in the CD-ROM drive.
3.  Follow the instructions on the screen.