Hardware configuration conflicts

Hardware configuration conflicts

Use the following information to help resolve hardware configuration conflicts:

1.  Run the Configuration/Setup Utility program to view  and change the resources that the system board  functions use. Record the current settings before  making any changes. (See Configuration/Setup utility program  for instructions.)
2.  Determine which adapter or device is causing the conflict.
3.  Change adapter jumpers or switches. Some devices  use jumpers and switches to define the system  resources that they need. If the settings are incorrect  or set to use a resource that cannot be shared, a  conflict occurs, and the device will remain deactivated  by the configuration program.
4.  Change system board jumpers or switches. Then,  refer to the system-board diagram inside your server.
5.  Remove the device or adapter. Some configurations  are not supported. If you must remove an adapter, see Installing or Removing ISA and PCI Adapters