| Option | Part Number | Description |
|---|---|---|
| Backplane Repeater | 94G7426 (1) | Netfinity 7000 Backplane Repeater Kit |
| Battery Backup | 76H5401 | ServeRAID II 8MB/Battery-Backup Cache |
| Battery Backup | 28L1003 | ServeRAID-3H 32MB/Battery-Backup Cache |
| Bulkhead Cable | 94G7421 (2) | Netfinity PCI SCSI Controller to Bulkhead Cable |
| Conversion Kit | 94G7424 | Netfinity 7000 Tower to Rack Conversion Kit |
| Conversion Kit | 94G7425 | Netfinity 7000 Rack to Tower Conversion Kit |
| Converter | 01K8017 | 8-mm to 68-pin Converter (required for the quorum-arbitration link when using Microsoft Cluster Server with a ServeRAID II or ServeRAID-3H adapter) |
| Hard Disk Drive | 94G7429 | Netfinity 4.51 GB Wide Ultra SCSI SCA-2 Hot-Swap (slim line) |
| Hard Disk Drive | 94G7430 (3) | Netfinity 9.1 GB Wide Ultra SCSI SCA-2 Hot-Swap (half high) |
| Hard Disk Drive | 01K8053 | Netfinity 9.1 GB Wide Ultra SCSI SCA-2 (slim line) |
| Hard Disk Drive | 01K8055 (3) | Netfinity 18.2 GB Wide Ultra SCSI SCA-2 (half high) |
| Hard Disk Drive | 01K8009 | Netfinity 4.51 GB 10K Wide Ultra SCSI SCA-2 (slim line) |
| Hard Disk Drive | 01K8054 | Netfinity 9.1 GB 10K Wide Ultra SCSI SCA-2 (slim line) |
| Hard Disk Drive | 01K8010 (3) | Netfinity 9.1 GB 10K Wide Ultra SCSI SCA-2 (half high) |
| Hard Disk Drive | 01K8503 (3) | Netfinity 18.2 GB 10K Wide Ultra SCSI SCA-2 (half high) |
| Memory Kit | 94G7384 | Netfinity 256 MB DIMM Kit (4 x 64 MB DIMMs) |
| Memory Kit | 94G7385 | Netfinity 512 MB DIMM Kit (4 x 128 MB DIMMs) |
| Memory Kit | 94G7386 | Netfinity 1024 MB DIMM Kit (4 x 256 MB DIMMs) |
| Microprocessor Upgrade | 94G6678 | 200 MHz with 512 KB Level-2 cache |
| Microprocessor Upgrade | 94G7147 | 200 MHz with 1 MB Level-2 cache |
| Microprocessor Board Upgrade | 94G7387 | Netfinity Processor Board for 200 MHz/1 MB microprocessors |
| Monitor | 654000x (4) | G42 14-inch Color Monitor, white (13.2-inch image size) |
| Monitor | 654102x (4) | G51 15-inch Color Monitor, white (13.6-inch image size) |
| Monitor | 654640x (4) | G52 15-inch Color Monitor, stealth gray (13.6-inch image size) |
| Monitor | 65464Ax (4) | G54 15-inch Color Monitor, stealth gray (13.7-inch image size) |
| Monitor | 654740x (4) | G72 17-inch Color Monitor, stealth gray (15.7-inch image size) |
| Monitor | 65474Ax (4) | G74 17-inch Color Monitor, stealth gray (15.9-inch image size) |
| Network Adapter | 86H2432 | IBM 100/10 PCI EtherJet Adapter |
| Network Adapter | 08L2549 | IBM 10/100 PCI EtherJet Adapter |
| Network Adapter | 41H8900 | IBM PCI Token-Ring Adapter |
| Power Supply | 94G7150 or 01K8026 |
Netfinity 400 Watt Hot-Swap Redundant Power Option |
| Power Supply | 01K7951 | Netfinity 400 Watt Hot-Swap Redundant Power Supply II |
| RAID Cable | 76H5400 | Cable to use the ServeRAID II adapter's third channel externally |
| RAID Controller | 76H3584 (5) | IBM ServeRAID II Ultra SCSI Adapter (3 channels) |
| RAID Controller | 01K7207 | IBM Netfinity ServeRAID-3H Ultra2 SCSI Adapter (3 channels) |
| RAID Controller | 01K7364 | IBM Netfinity ServeRAID-3L Ultra2 SCSI Adapter (1 channel) |
| Security | 94G7427 | Netfinity Security Cover III |
| Tape Drive | 01K1282 | IBM 12/24 GB DDS/3 4mm Internal Drive |
| Tape Drive | 01K1325 | IBM 20/40 GB 8mm SCSI Tape Drive |
| Tape Drive | 01K1320 | IBM 20/40 GB DLT SCSI Tape Drive |
| Tape Drive | 04K0149 | IBM 35/70 GB Internal DLT Drive |
| Tape Drive | 01K1174 (6) | IBM 35/70 GB External DLT Drive |
| Tape Drive | 76H0485 (7) | 20/40 GB 8-mm SCSI Tape Drive |
| Terminator | 94G7587 | Active terminator for internal SCSI cable. |
| UPS | 94G6674 (8) | APC Smart-UPS 1400 RMB (19 minute runtime at 490 Volt Amps) |
| UPS | 94G6676 (8) | APC Smart-UPS 3000 RMB (60 minute runtime at 490 Volt Amps) |
| UPS | 94G3136 (8) | APC Smart-UPS 1400 (22 minute runtime at 490 Volt Amps) |
(1) This kit connects the hot-swap backplanes together to support up to 12 internal drives on one SCSI or ServeRAID channel.
(2) This cable enables you to use a SCSI controller on the system board to support external SCSI devices.
(3) This drive occupies two bays.
(4) The 'x' varies by geographic location.
(5) The ServeRAID II adapter firmware, BIOS code, device drivers, and utility programs must be at version 2.40 or higher.
(6) Requires bulkhead cable, IBM Part Number 94G7421.
(7) If installed as the last or only device on the SCSI bus, the IBM Part Number 94G7587 terminator is required.
(8) Uninterruptible power supply (UPS) stated runtimes and power are for typical configurations (70% of maximum capacity).
Please see the LEGAL - Trademark notice.
Feel free - send a
for any BUG on this page found - Thank you.