Installing IPSSEND and IPSMON for OS/2, Windows NT, or NetWare
Installing IPSSEND and IPSMON for OS/2, Windows NT, or NetWare
To install these programs for OS/2, Windows NT, or NetWare:
- Start the server.
- After the operating system loads, insert the IBM ServeRAID Command Line Programs Diskette
into the diskette drive.
- If you are using NetWare, go to (below) step 5.
If you are using Windows NT or OS/2, create an IPSADM directory on the hard disk drive.
To do this, go to the operating system command prompt and type:
md c:\ipsadm
Notes:
- The c represents the drive where OS/2 or Windows NT is installed.
- If you installed the Administration and Monitoring Program files, you already created this directory.
- Press Enter.
- Copy the IPSSEND.EXE file to the hard disk drive by typing one of the following at the command prompt:
- For OS/2, type:
copy a:\os2\ipssend.exe c:\ipsadm
- For Windows NT, type:
copy a:\nt\ipssend.exe c:\ipsadm
- For NetWare, type:
copy a:\netware\ipssend.nlm c:\nwserver
Notes:
- The a represents the drive assignment for the diskette drive that contains the ServeRAID diskette.
- The c represents the drive where OS/2, Windows NT, or NetWare is installed.
- These instructions assume that you installed NetWare in the NWSERVER directory.
- Press Enter; then, copy the IPSMON.EXE file to the hard disk drive by typing one of the following at the command prompt:
- For OS/2, type:
copy a:\os2\ipsmon.exe c:\ipsadm
- For Windows NT, type:
copy a:\nt\ipsmon.exe c:\ipsadm
- For NetWare, type:
copy a:\netware\ipsmon.nlm c:\nwserver
Notes:
- The a represents the drive assignment for the diskette drive that contains the ServeRAID diskette.
- The c represents the drive where OS/2, Windows NT, or NetWare is installed.
- These instructions assume that you installed NetWare in the NWSERVER directory.
- Press Enter; then, refer to Chapter 5, 'Starting and Using the Utility Programs' for information
to start and use the IPSSEND and IPSMON programs.
Back to
Please see the LEGAL - Trademark notice.
Feel free - send a
for any BUG on this page found - Thank you.