Unload Button

Unload Button

•  Select Button
•  Cartridge Insert and Release Handle
•  Beeper

Note: The Unload button operates only when the power to the tape library is on.

The Unload button enables a tape cartridge to be removed from the tape library.
To remove a cartridge, press the Unload button.
After the Unload button is pressed, the tape drive rewinds the tape into the cartridge and sounds a beeper to let you know that the cartridge may be removed
(unloading may take approximately one minute).
The green Operate Handle light also comes on.

Note: Unloading may take up to two minutes if the cartridge is at the end of tape.